00467
 |
This gas seperation contraption consists of two major equipment, one is the 150L jacketed reactor, the other is the 100L flash tank. They are connected by the pipeline and controlled by the PID intelligent controller. 150L reactor ᆞDesign pressure: 1.3 Mpa ᆞDesign temperature: 220°C ᆞMedium: Water solution with mild corrosion ᆞMaterial: reaction kettle: Stainless steel S316L Jacket: carbon steel Q345R Flange: carbon steel 16Mn ᆞStirrer type: paddle + Anchor There is solid reactant medium , so the anchor style stirrer is needed. ᆞHeating type: Thermal oil bathed elecric heating ᆞApplication: The reactor provide the required conditions for the reatants. After the reaction is finished, the discharge valve is open and the product will be pressed into the flash tank by pressure inside the kettle. |
| Flash tank ᆞDesign pressure: 0.05 Mpa ᆞDesign temperature: 150°C ᆞMedium: products from 150L reactor. ᆞMaterial: stainless steel S316L ᆞInlet port: three steps variable diameter connection ᆞApplication: The flash tank is designed to seperate the gas from the liquid. The principle is the boiling point of medium will be reduced when pressure gets down. |
 |
 |
Platform ᆞSize: L3000 * W2000 * H2600. ᆞMaterial: carbon steel , spray painted. ᆞDemountable. |
| Design pressure (MPa) | Working pressure (MPa) | Design Temperature (℃) | Operating temperature (℃) | Materia | |
| kettle | 1.5 | 1.3 | 220 | 180 | S31603，16Mn |
| jacket | ATM | ATM | 220 | 180 | Q345R |
| Full Volume (L) | Effective volume (L) | stirring | stirring speed | heating | |
| kettle | 180 | 150 | paddle + anchor | 10~100 | oil bath electric heating |
| Design pressure (MPa) | Working pressure (MPa) | Design Temperature (℃) | Operating temperature (℃) | Materia | |
| kettle | 0.2 | ATM~0.05 | 150 | 100 | S31603 |
| Full Volume (L) | Effective volume (L) | stirring | stirring speed | heating | |
| kettle | 140 | 100 | / | / | / |
