We're sharing knowledgein the areas which fascinate us the most

Pressure vessel hydrothermal synthesis homogeneous reactor single reaction kettle

By WHGCM September 28th, 2023 77 views
Pressure vessel hydrothermal synthesis vessel is also known as polymerization reactor, disintegration tank, high-pressure disintegration tank, high-pressure tank, reaction kettle, pressure soluble bomb, digestion tank, hydrothermal synthesis kettle, or experimental reactor.

It is widely used in new materials, energy, environmental engineering, and other fields of scientific research experiments, university teaching, scientific research units, and chemical laboratories for scientific research commonly used small reactor.
The outer body material of the Pressure vessel hydrothermal synthesis vessel is S30408 (304) or S31603 (316L), and the inner liner has PTFE and stainless steel. The use of arc-shaped line sealing, manual spiral solid. The reaction material system refers to the kettle body, and ensures the charging coefficient is less than 0.8. When the reaction material system is corrosive, it should be placed in a PTFE liner to ensure that the kettle body is not corrosive.
I. Product characteristics:
1. Good corrosion resistance, no overflow of harmful substances, reduce pollution, safe use.
2. After warming and pressurizing, it can dissolve the specimens which are difficult to dissolve under normal conditions and the specimens containing volatile elements quickly and without loss.
3. Beautiful appearance, reasonable structure, simple operation, shorten analysis time, and reliable data.
4. Inside the PTFE bushing, double-layer care, can be resistant to acid, alkali, and so on.
5. It can replace the platinum crucible to solve the problem of dissolved sample processing for trace element analysis in high-purity alumina. The pressure dissolving bomb adopts an external heating method to reduce the volume, and favorable multi-reactor in the same reaction operation temperature (such as more than one reactor in the oven heating).

1. Working temperature: ≤230℃.
2. Working pressure: ≤6MPa
3. Temperature rise and fall rate: ≤5℃/min
4. Specifications 25, 50, 100, 200ml, 500ml, 800ml, and 1000ml can be customized according to user requirements (temperature, shape).
Third, components:
1. top wire bolt 2. kettle cover 3. spring pad 4. flat cover 5. liner cover 6. inner liner 7. bottom cover 8. kettle body
IV. Precautions for use (use protective gloves and special clamping tools during high-temperature operation):
1. Loosen the top wire when loading, tighten the kettle body and kettle cover with a wrench, and then tighten the top wire;
2. When disassembling, loosen the top wire first, and then unscrew the kettle body and kettle cover.
Why there are so many stainless steel reactor in chemical industry?
Read More
Hydrogenation reactor design: Hold hydrogenation in safety and efficiency
Read More
Please fill out the form below and click the button to request more information about
Temprature required*
Volume of Reactor*
Pressure of the reactor*
Medium for reaction*
Other requirement on the reactor( <5000 Characters)