00435
| No. | Parameters | Kettle | Jacket | |
| 1 | Full volume（L） | / | ||
| 2 | Work volume（L） | 2000 | ||
| 3 | Design pressure（MPa） | -0.1 | 0.4 | |
| 4 | Work pressure（MPa） | -0.1 | 0.2 | |
| 5 | Design temperature（℃） | 200 | 200 | |
| 6 | Work temperature（℃） | 170 | 170 | |
| 7 | Material | N6+Q345R | Q345R | |
 |
Kettle cover -Liquid phase material feeding port -Distillation port -Vacuum port -Tank inner temp measuring ports -Pressure gauge/safety valve port -Jacket thermal oil electric heater ports Note: all nozzle ports & fitting type can be customized Customized ports -Magnetic sealing shaft sleeve -Ports with blind plate for backup usage -All ports' sizes are customized -The ports of jacket are flanged for fast assembly purpose Characteristics -Different with other industrial reactors, this reactor doesn't have the manhole, which is usually used for maintaining and cleaning purpose. The reason of eliminating the manhole is because the medium and product of the chemical reaction to be applied for this reactor is clean enough, and with very low viscosity. -The flanges are with RF contact surface, that has a higher sealing effect than PL joint surface. |
| Stirrer mechanism -Magnetic sealing stirrer -Core technology: Static sealing, magnetic transmission -Stirrer coupler with inner cooling system inlet/outlet -frequency conversion speed regulation -Characteristics This industrial reactor has the volume of 2000L, while it's strirrer speed is upto 300RPM. Comparing with other reactor with the same size, the speed is very high. So, we applied a large motor of power as many as 11KW to drive the shaft. Because of the high torque caused by the motor and blade, the magnetic coupler needs much more magnetic steel rings. All of above features make the size of the magnetic much larger. And this is another reason why the reactor lid doesn't have the manhole. Because not enough space on the reactor cover left to open a manhole. |
 |
 |
Tank bottom -9+9=18 pcs Jacket thermal oil electric heater ports,ensure heated evenly -Discharge port with bling plate covered -Jacket drain port - Characteristics The ports for the electric heaters are very significant feature for this reactor. As most of the industrial reactors client are using the circulation heating style instead. For this reactor, because the boiler or circulation heating tank is not available for customer, so we design the electric heater to directly heating the thermal medium inside the jacket. This design has the advantages of easy operate, easy maintaining. |
| Full Volume (L) | Design pressure (MPa) | Working pressure (MPa) | Design Temperature (℃) | Operating temperature (℃) | |
| kettle | 2000 | -0.1 | -0.1 | 200 | 200 |
| Jacket | 0.4 | 0.2 | 170 | 170 | |
| Material contact with medium | corrosion allowance | joint efficiency | heating method | Motor power (KW) | |
| kettle | N6+Q345R | 1 | 1 | oil bath electric heating | 11 Explosion-proof |
| Jacket | Q345R | 1.5 | 0.85 | ||
| sealed manner | Stirring mode | stirring speed | |||
| magnetic seal | paddle | 0~300 |
